12V 30A DC Wireless Remote Control Relay Switch with 433MHz Frequency
$ 10.23
Description
About Receiver: Working voltage: DC12V-48V Quiescent condition: Less than 8mA Working temperature: -40 Degree +80 Degree Receiver sensitivity: more than -105dBm Working frequency: 433mhz Output voltage: Input=output Max load current: 30A Size: 105 x51 x 30mm About Working way: Momentary: Relay: Press and hold -> On; Release -> Off. Toggle: Relay: Press -> On; Press same button again -> Off· Latched: Relay: Press -> On; Press other button -> Off. Delay time :Press remote control button, the corresponding relay actuates and keeps working until the time out. Learning Method : Input 12V for the Receiver Momentary: press the Learning Button 1 time. the Led indicator flash 1 time, Then press transmitter, the Led indicator flash for 3 times, learning successfully. Toggle: press the Learning Button 2 time. the Led indicator flash 2 time, Then press transmitter, the Led indicator flash for 3 times, learning successfully. Latched: press the Learning Button 3 time. the Led indicator flash 3 time, Then press transmitter, the Led indicator flash for 3 times, learning successfully. Delay time (5S): press the Learning Button 4 time. the Led indicator flash 4 time, Then press transmitter, the Led indicator flash for 3 times, learning successfully. Delay time (10S): press the Learning Button 5 time. the Led indicator flash 5 time, Then press transmitter, the Led indicator flash for 3 times, learning successfully. Delay time (15S): press the Learning Button 6 time. the Led indicator flash 6 time, Then press transmitter, the Led indicator flash for 3 times, learning successfully. Clearning Method: Press the Learning button 8S . Until the receiver Led indicator flash for 3 times and OFF, it mean Clearing Code About Transmitter: Buttons: 2 Buttons Remote Distance: 20-50M Operating Current: 13 mAh Encode: Fixed code / EV1527 code Easy to Use ：the Working voltage: DC12V-48V (DC 12V 24V 36V 48V ). We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it.( We send Latched mode,that is press the button "on" is working/ON , press the button "off" is stop/OFF ) Widely Use：This remote switch used in industrial control and fields, such as light, motor, remote controller, wireless alarm, windows,lifting equipment, doors, wireless door alarm,industry machine , wireless controller, and other fields Signal：Wireless RF signal can pass through walls, floors, doors or windows. You can use or more units in the same place. You can turn on/ off the receiver with transmitter from any place within a reliable distance(Max range is up to 164ft/50m with no obstacle). Learning code： the Learning code has high-level for its low repetitive rate and re-learn mode, it can delete the old code and re-learn a new code,when a remote control get lost,So you could always control of it. the Package Include: 1 x Remote Switch , 2 x Remote Controls, 1 x Manual .
