1/4x6 Hex Head Concrete Anchor Screw with Drill Bit for Masonry
$ 60.93
Description
Applications The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick. Environment The anchor is designed for use in a Dry environment. Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached. Hole Diameter/Bit Diameter The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Driver Required A 5/16" nut driver is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 1/4". Length Anchor The length of the anchor is 6" Thread Length The length of the threads on the anchor is 1-3/4" in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 4-1/2" to 5". This will ensure that the minimum embedment of 1" will be met. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4" from each other when measured center to center. Edge Distance It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete. BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost SLOTTED HEX HEAD-Can be driven with a nut driver SELF-TAPPING-Taps threads directly into masonry and requires no other anchor DIAMOND POINT-Easier to drive the screw to save time
This concrete screw anchor is a game-changer for DIY projects! The hex head design keeps it flush and secure, while the included drill bit makes installation a breeze. Perfect for concrete, brick, or block, it holds strong in dry environments. The carbon steel construction feels durable, and the blue coating adds a nice touch. Drilling the 3/16" hole is quick with a carbide bit, and the anchor grips tight once set. Great for shelves, brackets, or anything needing a solid mount—no more wobbly fixes! Highly recommend for both pros and weekend warriors.